Small-Size CO2 Laser Cutter/Engraver, 300W to 600W
Servo and ball-screw drive, up to 600W
Model A-MIX 13: a CO2 laser cutter/engraver for nonmetal parts, with one 51.2 x 39.4 in bed and a tube of 300W, 450W or 600W.
- Bed: 51.2 x 39.4 in (1,300 x 1,000 mm)
- Tube choices: 300W, 450W, 600W
- X and Y on ball screws and linear guides
- Closed-loop 750W servos, to 2,000 rpm
- Autofocus built into the laser head
- Frame of welded 0.31 in (8 mm) steel tube
- Twin 750W exhaust blowers inside
- 300W tube: acrylic to 0.79 in (20 mm)

Our A-MIX 13 cuts and engraves nonmetal parts on one 51.2 x 39.4 in (1,300 x 1,000 mm) bed. Order the CO2 tube at 300W, 450W or 600W. The head is carried by servo motors on ball screws and linear guides, and its built-in autofocus sets the height for each material.
A 300W tube gets through acrylic as thick as 0.79 in (20 mm), MDF to 0.39 in (10 mm) and wood board to 0.59 in (15 mm). For engraving, resolution is 0.001 in (0.025 mm) and the smallest letters are 0.04 in (1 mm).
Specifications
| Parameter | Value |
|---|---|
| Model | A-MIX 13 |
| Working area | 51.2 x 39.4 in (1,300 x 1,000 mm) |
| Laser | CO2 laser tube with catalyst coating; small spot, stable beam |
| Laser power | 300W, 450W or 600W |
| Cutting thickness (300W) | Acrylic 0.79 in (20 mm); wood board 0.59 in (15 mm); MDF 0.39 in (10 mm) |
| Working and running speed | Up to 19.7 in/s (500 mm/s) |
| Positioning accuracy | ±0.0004 in (±0.01 mm) |
| Resolution | 0.001 in (0.025 mm) |
| Smallest characters | Letters 0.04 in (1 mm); Chinese characters 0.08 in (2 mm) |
| Laser head | Built-in autofocus head; height following optional |
| Optical path | Flying optics with three mirrors |
| Mirrors and lens | Coated high-reflection mirrors and focusing lens of imported material; lens focal length 2.5 in (63.5 mm) or 3.9 in (100 mm) |
| Transmission | High-precision ball screws and linear guides on X and Y; X and Y axes directly connected |
| Motors | 750W closed-loop servo motors and drives, up to 2,000 rpm; Japanese-made servo motor and drive optional |
| Machine bed | Industrial machine bed, annealed at high temperature; gantry finished on a five-axis milling machine |
| Frame | Welded 0.31 in (8 mm) square steel tube, enclosed by 0.08 in (2 mm) metal sheet; bed weight up to 1,102 lb (500 kg) |
| Gantry beam | Extruded aerospace-grade aluminum or cast iron |
| Worktable | Blade (knife-strip) table |
| Controller | DSP controller with LCD panel |
| File formats | DXF, AI, BMP, SVG and others, from CAD and drawing programs for Windows |
| Exhaust | Two built-in 750W blowers |
| Cooling | Water chiller: CW5200, CW5300 or CW6000 by tube; CW6000 with dual temperature and dual control |
| Air assist | Air compressor supplied by the customer, not included: at least 29 psi (0.2 MPa) and 1.5 hp (1.1 kW) |
| Power supply | 220V AC (±10%), 50 or 60 Hz |
| Power use | 5 kW at 20 A with a 300W tube |
| Operating conditions | 32–104 °F (0–40 °C); humidity up to 80%, no condensation |
| Machine size (L x W x H) | 80.7 x 70.9 x 46.5 in (2,050 x 1,800 x 1,180 mm) |
| Shipping crate (L x W x H) | 84.6 x 76.8 x 55.1 in (2,150 x 1,950 x 1,400 mm) |
| Weight | 2,205 lb (1,000 kg); shipping weight 2,425 lb (1,100 kg) |
| Unloading | Forklift with extension forks, or a crane |
| Safety | Limit switches and stops on the X and Y axes; CE and RoHS electrical parts |
Welded frame and bed
Square steel tube 0.31 in (8 mm) thick is welded into the frame and closed in with 0.08 in (2 mm) sheet, giving a body that is solid, stable and long-lasting. The bed by itself weighs as much as 1,102 lb (500 kg).
The bed is built like an industrial machine tool: annealed at high temperature, then the gantry is machined on a five-axis mill. A special surface treatment gives the cabinet a fine, smooth coat of paint.


The beam
You can have the beam in cast iron or in extruded aerospace-grade aluminum. Aluminum keeps the beam light and tough and resists corrosion well, so the head moves fast, and its dynamic behavior holds precision over long runs.
How the X and Y axes are driven
Each axis, X and Y, rides on a high-precision ball screw and linear guides, with a direct connection between X and Y.
The ball screw is built so it stays in place even if the spline sleeve separates from the spline shaft. Installing, servicing and inspecting it is easier as a result.
Guide rails made from high-quality German steel stay precise through long hours of running.
The 750W servo motors run in a closed loop and turn at up to 2,000 rpm, so speed is higher and response quicker. With the ball screws and rails, they bring out the full cutting performance. A servo motor and drive made in Japan can be ordered instead.
A triangular steel plate on the Y axis spreads the push of the single-side ball screw across both sides. Force and pressure stay even during a cut, and cutting is better and more stable.



Tube, head and beam path
Pick a 300W, 450W or 600W CO2 tube. It has a catalyst coating and produces a small spot with a steady beam.
Autofocus is part of the cutting head. Switch it on in the controller when you want it, and the head sets its own height each time the material thickness changes. Height following can be added as an option.
Three mirrors carry the beam in a flying-optics path. Mirrors and lens are coated, high-reflection parts of imported material, and lens focal lengths of 2.5 in (63.5 mm) and 3.9 in (100 mm) are offered.


Control and file types
The machine is run from a DSP controller with an LCD screen. It reads DXF, AI, BMP and SVG files, among other formats, saved from Windows CAD and drawing software.
Fume extraction, chiller and assist air
Two exhaust blowers of 750W each sit inside the machine and remove about 95% of the cutting dust and smoke.
Cooling comes from a CW5200, CW5300 or CW6000 chiller, chosen by tube power. The CW6000 is a dual-temperature unit with two controls.
For assist air you provide the compressor, rated at 29 psi (0.2 MPa) and 1.5 hp (1.1 kW) or more. The standard machine does not include one.
Protection and wiring
At the end of the X and Y travel, limit switches and stops halt the slide blocks before the guides or other parts can be damaged.
Electrical parts are checked to CE and RoHS standards, and each one is labeled to make service easier.


Footprint, weight and electrical
Plan for a machine of 80.7 x 70.9 x 46.5 in (2,050 x 1,800 x 1,180 mm) weighing 2,205 lb (1,000 kg). The crate is 84.6 x 76.8 x 55.1 in (2,150 x 1,950 x 1,400 mm) and weighs 2,425 lb (1,100 kg). Take it off the truck with a crane, or with a forklift fitted with extension forks.
Power is 220V AC (±10%) at 50 or 60 Hz, and a 300W tube draws 5 kW at 20 A. Run it between 32 and 104 °F (0 and 40 °C), with humidity no higher than 80% and no condensation.
Standard equipment
| Item | Qty | Details |
|---|---|---|
| Machine body | 1 | Welded steel tube frame with metal sheet enclosure |
| CO2 laser tube | 1 | 300W, 450W or 600W |
| Laser head | 1 | Built-in autofocus |
| Laser power supply | 1 | Matched to the tube |
| Water chiller | 1 | CW5200, CW5300 or CW6000, by tube |
| Exhaust blowers | 2 | 750W, built in |
| Controller | 1 | DSP controller with LCD panel |
| Ball screws | 1 set | X and Y axes |
| Guide rails | 1 set | Linear guides |
| Servo motors and drives | 1 set | 750W, closed loop |
| Switching power supply | 1 | |
| Mirrors | 3 | |
| Focusing lens | 1 | 2.5 in (63.5 mm) or 3.9 in (100 mm) focal length |
The air compressor for assist air is not supplied.
Read next